Excavation, demolition and general contracting around Sunnyside, WAExcavation and demolition in Sunnyside, WA
Call or text (509) 439-2533 General contracting license
Bedrock Excavation and General Contracting
Excavation in Richland, WA
Service Area

Excavation in Richland, WA

Serving Richland · Benton County

Excavation, Demolition and General Contracting in Richland

Central Richland still holds the Alphabet Homes, which the federal government began building for Hanford workers in 1943. New homes keep going up every year. Under much of the city lies loose sand that blows once the ground is stripped. Old lots may need a garage or slab torn out, and new lots need pads cut and packed.

Bedrock Excavation and General Contracting serves Richland as part of our service area for excavation from Sunnyside to the Tri-Cities. Sunnyside sits at the center, about 43 road miles west on Interstate 82. For excavation in Richland, we take on demolition, mass excavation, site preparation, grading and building pads, plus general contracting. Call or text (509) 439-2533, and we look at the job and put the quote in writing.

What We Do in Richland

Request a Quote in Richland

Tell us about the teardown, dirt work, pad or building project and where it is. We look at the job and put the quote in writing.

Alphabet Homes and Older Lots in Central Richland

The Alphabet Homes got their nickname from standard floor plans labeled with letters. More than 1,600 went up during the war years, the city says. The government owned and rented them until Richland incorporated in the late 1950s, then sold them to private owners. Census survey figures still date about one in six Richland homes to the 1940s.

That history still shapes the paperwork for a new garage or shop. The city keeps the original property surveys from that sale, plus the plot plans it has filed. Its garage and shed handout says a building permit needs one of those plot plans. If none is on file, you draw one or hire someone to draw it.

On an older lot, new work can start with an old garage or slab coming out. Our house and garage demolition takes down whole structures and hauls the debris away. Old concrete comes out the same way, so the new slab or shop starts on clean ground.

Sand and Dust Rules on Richland Job Sites

NRCS soil maps show loose sand across much of Richland. In a sample of those maps, Quincy loamy sand and Burbank loamy fine sand cover about half the city's land. NRCS rates both as excessively drained, so water runs through them fast. Federal trench rules put sand and loamy sand in Type C, the class that needs the flattest sloped walls.

Bare sand also blows, and the Benton Clean Air Agency calls the Tri-Cities the most arid part of Washington. Richland's NOAA weather station averages about 7.3 inches of rain and snow a year. Before work that disturbs soil, the agency wants its soil destabilization notification completed. Benton County and its cities ask for a copy before they issue permits.

The agency's dust control list includes water or dust suppressants and grading less ground at a time. The city rents hydrant meters so contractors can wet down construction sites on windy days. Its stormwater page notes that Richland streets still collect sediment from construction sites. So on a Richland lot, grading and site work get planned around wind and runoff.

Where Richland Is Building New Homes

Richland keeps growing. The Census counted 60,560 people here in 2020, and the state's April 2026 estimate is 66,290. About four in ten Richland homes were built in 2000 or later, by Census survey figures.

The Census Bureau counted 324 single-family homes authorized by Richland permits during 2025, up from 218 two years earlier. Buildings with five or more units added 450 more. Badger Mountain South, a master-planned community, covers 1,480 acres and is planned for 5,000 homes.

Every one of those homes starts with dirt work. Site preparation for a new house covers clearing and stripping, foundation excavation, rough grading and backfill. The city's design criteria put the frost line at 24 inches, so footings go below that depth.

City Rules for Shops and Carports in Richland

Richland's Development Services Department calls its permit office a one-stop shop for construction and demolition. Its FAQ lists carports, porch covers, patio covers and attached decks among jobs that need a permit. Poured patios and private driveways up to 30 inches above grade need none, unless they get a roof. A new driveway curb cut needs a right-of-way permit from the city's engineering staff.

City code limits detached shops and garages in residential zones. One may reach 900 square feet, or half the home's floor area if that is larger, up to 1,200. Each stays one story, and one over 900 square feet tops out at 16 feet with no corrugated metal siding.

Even a shed of 200 square feet or less needs the city's no-fee location placement permit before it goes up. We build shops, carports, fences and decks, plus the shop pads and concrete slabs a building sits on. Check the limits for your lot with Development Services before the work starts.

Communities and areas we serve around Richland: Alphabet Homes, Gold Coast Historic District, Columbia Point, Howard Amon Park, Leslie Groves Park, Chamna Natural Preserve, Badger Mountain South, Meadow Springs, Horn Rapids, WSU Tri-Cities, George Washington Way, Jadwin Avenue.

Richland ZIP codes served: 99352, 99354.

View Richland, WA on Google Maps

Serving Richland and nearby

Richland is part of our service area. We look at the job first, then put the quote in writing.

(509) 439-2533
Our Services in Richland

Every Service We Bring to Richland

Excavator with a demolition grapple tearing down a two story house, demolition

Demolition

We take down houses, barns, garages, sheds and shops, and we tear out old concrete slabs. The debris leaves the property with us.

Learn More
Red dump trailer loaded with gravel raised over landscape fabric, mass excavation

Mass Excavation

We cut and fill large sites and move dirt in bulk for shops and commercial buildings. Extra dirt leaves by the load, and we haul in fill or gravel when a site runs short.

Learn More
Compacted gravel base inside wood forms with a plate compactor beside a house, site preparation

Site Preparation

We clear and strip the lot, then rough grade it and dig for the foundation. After the foundation is poured, we backfill around it.

Learn More
Finished gravel parking pad beside a concrete driveway and a wood fence, grading

Grading

We regrade worn gravel driveways and build new ones. We also grade yards and lots so water moves away from the house.

Learn More
New concrete slab with the wood forms still in place against a blue house, building pads

Building Pads

We cut and level building pads for shops, garages, houses and campers, with a compacted gravel base. When you want a concrete slab, we pour that too.

Learn More
Cleared orchard ground with piles of pulled trees at the far edge, orchard removal

Orchard Removal

We pull old orchards out of the ground, stumps and roots included. The wood gets piled or hauled away, and the ground is left clear for what comes next.

Learn More
Wood post carport with a metal roof on a gravel pad by a fence, general contracting

General Contracting

We build shops, carports and other outbuildings, plus fences, gates, decks and pergolas. The same company that prepares the ground puts up the structure.

Learn More
Richland FAQ

Questions We Hear Around Richland

A few of the questions we hear most around Richland. If yours is not here, call or text and ask.

Call (509) 439-2533

Do I need a permit to tear down a garage or house in Richland?
Yes. The city's building FAQ says all building work needs a permit, demolitions included, and Development Services issues it. For most projects, the Benton Clean Air Agency also wants an asbestos survey and a filed notice first. The agency has lighter rules for an owner-occupied single-family home, so ask it which apply.
What does excavation cost on a Richland lot?
It depends on the job, so we look at it before we price it. The amount of dirt moved and how far it is hauled drive much of the price. Loose sand adds dust control, and a teardown adds debris to haul away. Call or text (509) 439-2533, and we put the quote in writing.
Who marks the irrigation line in my Richland yard?
Call 811 two to 10 full business days before digging, and utilities mark their own lines. State law makes the lines you own on your property yours to locate. Your irrigation water may come from a city system or the Badger Mountain, Columbia or Kennewick irrigation district. Ask that provider about its lines before the dig.
Is my Richland lot in a flood zone?
Some Richland land lies in mapped flood hazard areas, and the city regulates building there. FEMA's online flood layer has no data for Richland, so check the paper maps at FEMA's Map Service Center. Inside those areas, a crawlspace floor and its heating ducts must sit 1 foot or more above base flood elevation. That makes the height of the building pad part of the plan.
How tall can a fence be in Richland?
The city's fence handout allows a 3 foot solid fence or a 4 foot open fence in the front yard. Up to 6 feet is allowed elsewhere on the lot. A fence needs no building permit, but corner lots and Badger Mountain South have extra rules. Check with Development Services before the posts go in.
Nearby

We Also Serve

Request a Quote

Get In Touch With Bedrock Excavation

Tell us about the job and where it is, and we will set a time to look at it. Call or text (509) 439-2533 or use the form, and the quote comes to you in writing.

  • Call or text (509) 439-2533
  • Serving Sunnyside, WA and the Yakima Valley out to the Tri-Cities
  • Written quotes · excavation, demolition and general contracting

Request a Quote

Tell us about the teardown, dirt work, pad or building project and where it is. We look at the job and put the quote in writing.

Call (509) 439-2533